Danfoss 087H3241 User Manual

VI.KT.G6.02 © Danfoss | 2016.05 | 9
Daily use
Today’s schedule
The rst display will show you the start of the rst comfort period (‘Start1’). See or change
the start of this period.
The rst bar will blink.
Wed ]]]][!]]]!!]
Start1 09:00
See or change the end (‘Stop1’) of the rst comfort period.
The next bar will blink.
Wed ]]]][!{]]!!]
Stop1 12:00
See or change the start (‘Start2’) of the next comfort period.
Wed ]]]][!{]]!!]
Start2 18:00
See or change the next start / stop periods, if necessary.
Wed ]]]][!{]]!!]
Stop2 22:00
The schedule has always two comfort periods a day. The start and stop times can be set in
half-hourly intervals (30 min.).
To arrange only one comfort period on a day: Set Start2 and Stop2 times to the same time
value.

Danfoss 087H3241 Specifications

General

Brand	Danfoss
Model	087H3241
Category	Controller
Language	English