Master control signal for changing between day and night time operation
Master control signal used to shut down a case for a time period. During shutdown there will be no alarm monitoring
Master control signal that will close the injection valve
Master control signal that will provide forced cooling
Master control signal for starting a defrost. At adaptive defrost the defrost might be skipped if the defrost is not needed
Read out the actual state of the defrost
Master control signal used for co-ordinated defrost control to hold cabinets from returning to normal refrigeration after a defrost
until all cabinets have terminated defrost
Master control signal used to prevent a defrost start in a controller.
Master control signal for control of light via a data communication signal from the system manager
Master control signal sending the actual measured dewpoint from the system manager to the controller over the network.
Calculated load factor for the refrigerated appliance. Used for suction pressure optimization.
Master control signal that will lock down all Bluetooth data communication
Required minimum delta temperature across evaporator (S3 - Te) in order to keep the air temperature at the actual setpoint
© Danfoss | Climate Solutions | 2022.08 BC365212986197en-000201 | 23
AK-CC55 Compact
To Next Page
Loading...
