0=OFF, 1=ON, 2=OFF and
suppress defrost, 3=ON
and suppress defrost
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
Control
Table 20: Control
0=Not used, 1=High Prior-
ity, 2=Medium priority,
3=All
Fan stop at blinds closing
Rail heat PWM - Period
time
Max superheat liquid ctrl.
Min superheat liquid ctrl
0=None, 1=Local, 2=Net-
work
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
DO cong and manual
Table 21: DO cong and manual
0=None, 1=Fans, 2=Fan
ECO, 3=Defrost, 4=Rail
heat, 5=Alarm, 6=Light,
7=Blinds, 8=Compressor/
LLSV, 9=Compressor 2,
10=Air heater
0=None, 1=Fans, 2=Fan
ECO, 3=Defrost, 4=Rail
heat, 5=Alarm, 6=Light,
7=Blinds, 8=Compressor/
LLSV, 9=Compressor 2,
10=Air heater
0=None, 1=Fans, 2=Fan
ECO, 3=Defrost, 4=Rail
heat, 5=Alarm, 6=Light,
7=Blinds, 8=Compressor/
LLSV, 9=Compressor 2,
10=Air heater
© Danfoss | Climate Solutions | 2022.08 BC365212986197en-000201 | 41
AK-CC55 Compact