High temperature - Priori-
ty
0=Disabled, 3=Low,
2=Medium, 1=High
Low temperature - Priority
0=Disabled, 3=Low,
2=Medium, 1=High
0=Disabled, 3=Low,
2=Medium, 1=High
0=Disabled, 3=Low,
2=Medium, 1=High
0=Disabled, 3=Low,
2=Medium, 1=High
0=Disabled, 3=Low,
2=Medium, 1=High
0=Disabled, 3=Low,
2=Medium, 1=High
Control stopped - Priority
0=Disabled, 3=Low,
2=Medium, 1=High
Leak detection - Priority
0=Disabled, 3=Low,
2=Medium, 1=High
1=Thermostat air,
2=Alarm air, 3=S3 Air ON
evap.
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
(2)
In order to change this parameter the parameter r12 Main switch must be set in position "SEr" allowing manual control of outputs.
(1)
In order to change this parameter the regulation must be stopped via the parameter r12 Main switch = OFF.
(2)
In order to change this parameter the parameter r12 Main switch must be set in position "SEr" allowing manual control of outputs.
Service
Table 22: Service
0=Normal ctrl., 1=Hold af-
ter defrost, 2=Min ON tim-
er, 3=Min OFF timer,
4=Drip o, 10=Main
switch OFF, 11=Thermo-
stat cut-out, 12=Frost pro-
tection S4, 14=Defrost,
15=Fan delay, 16=Forced
closing, 17=Door open,
18=Melt period, 19=Mod-
ulating temp. control,
20=Emergency control,
23=Adaptive superheat
control, 24=Start injec-
tion, 25=Manual control,
26=No refrigerant selec-
ted, 29=Case cleaning,
30=Forced cooling,
31=Door open, 32=Pow-
er-up delay, 33=Air heat-
ing, 45=Shut down con-
troller, 48=Adaptive liquid
control
AK-CC55 Compact
© Danfoss | Climate Solutions | 2022.08 BC365212986197en-000201 | 42