If Oil Top-up is needed, it must be done while the compressor is idle. Use the schrader connector or any other
accessible connector on the compressor suction line. Always use original Danfoss POE oil 160SZ from new cans. For
more detailed information see “Lubricants lling in instructions for Danfoss Commercial Compressors”
AP000086435866.
Dismantle and disposal
Danfoss recommends that compressors and compressor oil should be recycled by a suitable company at its
site.
© Danfoss | Climate Solutions | 2022.10 AB288965961751en-001402 | 63
Scroll compressors, DSH090 to DSH600 | Application