Danfoss Metasys N2 - Internal Integers (ADI)

3.1.6 Internal Integers (ADI)
NPA Unit Description Range FC Par. Number
0 - Language Selection 0-01
1 - Setup Copy Function 0-51
2 - Custom Readout Unit 0-30
3 - Large Readout 0-23
4 - Small Readout 1 0-20
5 - Small Readout 2 0-21
6 - Small Readout 3 0-22
7 - Unit of Local Reference 0-05
8 - Hand Start Button 0-40
9 - Off/Stop Button 0-41
10 - Auto Start Button 0-42
11 - Reset Button 0-43
13 - Operating State at Power Up 0-04
21 - Torque Characteristics 1-03
23 - Motor Preheat 2-00
24 - Motor Thermal Protection 1-90
31 - Reference Site 3-13
32 - Over Volt Control 2-17
33 - Reference Function 3-04
40 - Digital Input 18 5-10
41 - Digital Input 19 5-11
42 - Digital Input 27 5-12
43 - Digital Input 29 5-13
44 - Digital Input 32 5-14
45 - Digital Input 33 5-15
51 Sec Live Zero Time Out 6-00
52 - Live Zero Function 6-01
53 - Signal Output 42 6-50
55 - CC Relay 1 Function 0 to 255 5-40:0
56 - CC Relay 2 Function 0 to 255 5-40:1
57 - Option B Relay 1 Function 0 to 255 5-40:6
58 - Option B Relay 2 Function 0 to 255 5-40:7
59 - Option B Relay 3 Function 0 to 255 5-40:8
60 - Reset Function 14-20
61 - Flying Start 1-73
62 - Noise Reduction Method 14-04
63 - Broken Belt Function 22-60
Appendix
VLT
®
Metasys
MG.11.G2.02 - VLT
®
is a registered Danfoss trademark 27
3
3