Danfoss MP1 Service Manual

Neutral Start Switch schematic
P005 702
M14
M5
M4
M3
Neutral Start Switch data
Max. continuous current with switching
8.4 A
Max. continuous current without switching
20 A
Max. voltage
36 V
DC
Electrical protection class
IP67 / IP69K with mating connector
Case gauge port M14
The drain port should be used when the control is mounted on the unit’s bottom side to flush residual
contamination out of the control.
MDC w/h drain port shown
P400344
Case gauge port M14
Service Manual
MP1
Operation
©
Danfoss | April 2019 AX00000244en-000201 | 23

Danfoss MP1 Specifications

General

Brand	Danfoss
Model	MP1
Category	Water Pump
Language	English