Danfoss VLT AHF 005 Design Guide

6 Options and Accessories Overview
6.1 Fieldbus Devices
This section describes the eldbus devices that are
available with the VLT
®
HVAC Drive series. Using a eldbus
device reduces system cost, delivers faster and more
ecient communication, and provides an easier user
interface. For ordering numbers, refer to
chapter 13.2 Ordering Numbers for Options/Kits.
6.1.1
VLT
®
PROFIBUS DP-V1 MCA 101
The MCA 101 provides:
•
Wide compatibility, a high level of availability,
support for all major PLC vendors, and compati-
bility with future versions.
•
Fast, ecient communication, transparent instal-
lation, advanced diagnosis, and parameterization
and auto-conguration of process data via a GSD
le.
•
Acyclic parameterization using PROFIBUS DP-V1,
PROFIdrive, or Danfoss FC
prole state machines.
6.1.2
VLT
®
DeviceNet MCA 104
The MCA 104 provides:
•
Support of the ODVA AC drive prole supported
via I/O instance 20/70 and 21/71 secures compati-
bility to existing systems.
•
Benets from ODVA’s strong conformance testing
policies that ensure products are interoperable.
6.1.3
VLT
®
LonWorks MCA 108
LonWorks is a eldbus system developed for building
automation. It enables communication between individual
units in the same system (peer-to-peer) and thus supports
decentralizing of control.
•
No need for large main station (master/slave).
•
Units receive signals directly.
•
Supports Echelon free-topology interface (exible
cabling and installation).
•
Supports embedded I/Os and I/O options (easy
implementation of de-central I/Os).
•
Sensor signals can quickly be moved to another
controller via bus cables.
•
Certied as compliant with LonMark version 3.4
specications.
6.1.4
VLT
®
BACnet MCA 109
The open communications protocol for worldwide building
automation use. The BACnet protocol is an international
protocol that eciently integrates all parts of building
automation equipment from the actuator level to the
building management system.
•
BACnet is the world standard for building
automation.
•
International standard ISO 16484-5.
•
With no license fees, the protocol can be used in
building automation systems of all sizes.
•
The BACnet option lets the drive communicate
with building management systems running the
BACnet protocol.
•
BACnet is typically used for heating, ventilation,
cooling, and climate equipment control.
•
The BACnet protocol easily integrates into
existing control equipment networks.
6.1.5
VLT
®
PROFINET MCA 120
The MCA 120 option combines the highest performance
with the highest degree of openness. The option is
designed so that many of the features from the VLT
®
PROFIBUS MCA 101 can be reused, minimizing user eort
to migrate PROFINET and securing the investment in a PLC
program.
•
Same PPO types as the VLT
®
PROFIBUS DP V1
MCA 101 for easy migration to PROFINET.
•
Built-in web server for remote diagnosis and
reading out of basic drive parameters.
•
Supports MRP.
•
Supports DP-V1. Diagnostic allows easy, fast, and
standardized handling of warning and fault
information into the PLC, improving bandwidth in
the system.
•
Supports PROFIsafe when combined with VLT
®
Safety Option MCB 152.
•
Implementation in accordance with Conformance
Class B.
Options and Accessories Ove...
VLT
®
HVAC Drive FC 102
42 Danfoss A/S © 11/2017 All rights reserved. MG16C302
6
6

Danfoss VLT AHF 005 Specifications

General

Brand	Danfoss
Model	VLT AHF 005
Category	DC Drives
Language	English