Danfoss vlt aqua Design Guide

Mechanical dimensions
Enclosure size (kW) D1 D2 D3 D4 E1 E2 F1 F2 F3 F4
380–480 V AC 525–690 V AC
110-132
45-160
160-250 200-400
110-132
45-160
160-250 200-400
315-450 450-630
315-450 450-630
500-710 710-900
800-1000
1000-1200
500-710 710-900
800-1000
1000-1200
IP NEMA
21/54
Type 1/12
21/54
Type 1/12
00
Chassis
00
Chassis
21/54
Type 1/12
00
Chassis
21/54
Type 1/12
21/54
Type 1/12
21/54
Type 1/12
21/54
Type 1/12
Shipping dimensions (mm):
Width 1730 1730 1220 1490 2197 1705 2324 2324 2324 2324
Height 650 650 650 650 840 831 1569 1962 2159 2559
Depth 570 570 570 570 736 736 927 927 927 927
Adj. Freq. Drive dimensions: (mm)
Height Backplate A 1209 1589 1046 1327 2000 1547 2281 2281 2281 2281 Width Backplate B 420 420 408 408 600 585 1400 1800 2000 2400 Depth
C 380 380 375 375 494 494 607 607 607 607
Dimensions brackets (mm/inch) Center hole to edge a 22/0.9 22/0.9 22/0.9 22/0.9 56/2.2 23/0.9 Center hole to edge b 25/1.0 25/1.0 25/1.0 25/1.0 25/1.0 25/1.0 Hole diameter c 25/1.0 25/1.0 25/1.0 25/1.0 25/1.0 25/1.0
d 20/0.8 20/0.8 20/0.8 20/0.8 27/1.1
e 11/0.4 11/0.4 11/0.4 11/0.4 13/0.5
f 22/0.9 22/0.9 22/0.9 22/0.9
g 10/0.4 10/0.4 10/0.4 10/0.4 h 51/2.0 51/2.0 51/2.0 51/2.0
i 25/1.0 25/1.0 25/1.0 25/1.0
j 49/1.9 49/1.9 49/1.9 49/1.9
Hole diameter k 11/0.4 11/0.4 11/0.4 11/0.4 Max weight (kg)
104 151 91 138 313 277 1004 1246 1299 1541
Please contact Danfoss for more detailed information and CAD drawings for your own planning purposes.
VLT
®
AQUA Drive Design Guide 5 How to Install
MG.20.N5.22 - VLT
®
is a registered Danfoss trademark 5-5
5

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled