3.6.14 Remote Mounting Kit for
The local control panel can be moved to the front of a cabinet by using
the remote built-in kit. The enclosure is the IP65. The fastening screws
must be tightened with a torque of max. 1 Nm.
Technical data
Enclosure: IP 65 front
Max. cable length between and unit: 9.8 ft [3 m]
Communication std: RS 485
Ordering no. 130B1113 Ordering no. 130B1114
Figure 3.26: LCP kit with graphical LCP, fasteners, 9.8 ft [3 m] cable and
gasket.
Figure 3.27: LCP kit with numerical LCP, fasteners and gasket.
LCP kit without an LCP is also available. Ordering number: 130B1117
For IP55 units, the ordering number is 130B1129.
VLT
®
AQUA Drive Design Guide 3 VLT AQUA Selection
MG.20.N5.22 - VLT
®
is a registered Danfoss trademark
3-43
3
To Next Page
Loading...
