Danfoss vlt aqua Instruction

Figure 4.10: Space in front of IP21/IP54 enclosure type, frame size E7.
Figure 4.11: Space in front of IP21/IP54 enclosure type, frame size F17.
Wire access
Ensure that proper cable access is present including the necessary bending allowance.
NOTE!
All cable lugs/shoes must mount within the width of the terminal bus bar.
VLT AQUA Low Harmonic Drive Instruction
Manual
4 How to Install
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark 4-13
4

Danfoss vlt aqua Specifications

General

Supply Voltage	200-240V, 380-500V, 525-600V
Enclosure	IP20
Features	Energy optimization
Approvals	CE, UL, cUL
Input Voltage Range	200-240V, 380-500V, 525-600V
Output Voltage Range	0 to supply voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short circuit, Ground fault
Communication Interfaces	PROFIBUS
Cooling Method	Air-cooled