Index
2
24 Vdc Power Supply 4-32
3
30 Ampere, Fuse-protected Terminals 4-32
A
Ac Line Input Connections 4-47
Acceleration Time 6-18
Access To Control Terminals 4-53
Af Readouts 6-71
Af Settings 6-70
Airflow 4-24
Alarm/warning Code List 9-2, 9-11
Alarms And Warnings 9-1, 9-10
Ama 4-61, 5-8
Analog Inputs 8-2
Analog Output 8-2
Automatic Motor Adaptation (ama) 4-61, 6-16
Available Literature For Vlt® Aqua Drive 1-1
B
Back Cooling 4-23
Brake Cable 4-45
Brake Control 9-5
Brake Resistor Temperature Switch 4-46
C
Cable Lengths And Cross-sections 8-1
Cable-length And Cross-section: 4-33
Cabling 4-33
Changing A Group Of Numeric Data Values 5-7
Changing A Text Value 5-7
Changing Data 5-6
Changing Of Data Value 5-7
[Check Valve Ramp End Speed Hz] 3-87 6-19
[Check Valve Ramp End Speed Rpm] 3-86 6-19
Check Valve Ramp Time 3-85 6-18
Coasting 5-5
Comm. And Options 6-67
Communication Option 9-6
Configuration Mode 1-00 6-14
Connector/conduit Entry - Ip21 (nema 1) And Ip54 (nema12) 4-27
Control Cables 4-59
Control Cables 4-58
Control Card Performance 8-4
Control Card, 10 V Dc Output 8-3
Control Card, 24 V Dc Output 8-3
Control Card, Rs-485 Serial Communication: 8-2
Control Card, Usb Serial Communication 8-4
Control Characteristics 8-3
Control Terminals 4-54
Cooling 4-23
Copyright, Limitation Of Liability And Revision Rights 1-1
D
Data Readouts 6-70
VLT AQUA Low Harmonic Drive Instruction
Manual
Index
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark
10-1
To Next Page
Loading...
