Danfoss VLT AutomationDrive FC 302 - Page 193

(Parameter 5-12 Terminal 27 Digital Input [2]
Coasting Stop, Inverse).
•
Terminal 29 output
(Parameter 5-02 Terminal 29 Mode [1] Terminal 29
Mode Output and parameter 5-31 Terminal 29
Digital Output [27] Torque limit & stop).
•
Relay output [0] (Relay 1)
(Parameter 5-40 Function Relay [32] Mechanical
Brake Control).
12 13 18 37322719 29 33 20
+24 V P 5-10 [8] P 5-12 [2] P 5-02 [1] P 5-31 [27] GND
P 5-40 [0] [32]
Relay 1
01 02 03
-
+
130BA194.11
External
24 V DC
Mechanical brake
connection
Start
I
max
0.1 Amp
Illustration 12.8 Wire Conguration for Torque and Stop Limit
Application Examples Design Guide
MG38C202 Danfoss A/S © 01/2018 All rights reserved. 191
12 12