Danfoss VLT AutomationDrive FC 302 - Overview of Enclosures, 525-690

4.4 Overview of Enclosures, 525–690 V
Enclosure size D1h D2h D3h D4h D5h D6h D7h D8h
Power rating
1)
Output at 690 V (kW) 55–132 160–315 55–132 160–315 55–132 55–132 160–315 160–315
Output at 575 V (hp) 60–150 200–350 60–150 200–350 60–150 60–150 200–350 200–350
Protection rating
IP IP21/54 IP21/54 IP20 IP20 IP21/54 IP21/54 IP21/54 IP21/54
NEMA Type 1/12 Type 1/12 Type Chassis Type Chassis Type 1/12 Type 1/12 Type 1/12 Type 1/12
Hardware options
2)
Stainless steel back-
channel
– – O O – – – –
Mains shielding O O O O O O O O
Space heater O O O O O O O O
Safe torque o S S S S S S S S
No LCP O O O O O O O O
Numerical LCP O O O O O O O O
Graphical LCP O O O O O O O O
Fuses O O O O O O O O
Heat sink access
3)
O O O O O O O O
Brake chopper – – O O O O O XO
Regeneration terminals – – O O – – – –
Loadshare terminals – – O O O O O O
Fuses + loadshare – – O O – – – –
Disconnect – – – – O O O O
Circuit breakers – – – – – O – O
Contactors – – – – – O – O
24 V DC supply O O O O O O O O
Dimensions
Height, mm (in) 901 (35.5) 1107 (43.6) 909 (35.8)
1004 (39.5)
4)
1027 (40.4)
1027 (40.4)
4)
1324 (52.1) 1663 (65.5) 1978 (77.9) 2284 (89.9)
Width, mm (in) 325 (12.8) 325 (12.8) 250 (9.8) 375 (14.8) 325 (12.8) 325 (12.8) 420 (16.5) 420 (16.5)
Depth, mm (in) 379 (14.9) 379 (14.9) 375 (14.8) 375 (14.8) 381 (15.0) 381 (15.0) 386 (15.2) 406 (16.0)
Weight, kg (lb) 62 (137) 125 (276) 62 (137)
108 (238)
4)
125 (276)
179 (395)
4)
99 (218) 128 (282) 185 (408) 232 (512)
Table 4.5 D1h–D8h Drives, 525–690 V
1) All power ratings are taken at high overload. Output is measured at 690 V (kW) and 575 V (hp).
2) S = standard, O = optional, and a dash indicates that the option is unavailable.
3) Heat sink access is not available with stainless steel back-channel option.
4) With optional load share and regen terminals.
Product Overview VLT® AutomationDrive FC 302
14 Danfoss A/S © 01/2018 All rights reserved. MG38C202
44