Danfoss VLT FC 100 Series Programming Guide

9-70 Edit Set-up
Option: Function:
Select the set-up to be edited.
[0] Factory setup Uses default data. This option can be used as a data source to return the other set-ups to a known state.
[1]
*
Setup 1 Edits Set-up 1.
[2] Setup 2 Edits Set-up 2.
[3] Setup 3 Edits Set-up 3.
[4] Setup 4 Edits Set-up 4.
[9] Active setup Follows the active set-up selected in par. 0-10.
This parameter is unique to LCP and fieldbuses. See also par. 0-11
Edit set-up .
9-71 Save Data Values
Option: Function:
Parameter values changed via Profibus are not automatically stored in non-volatile memory. Use this parameter
to activate a function that stores parameter values in the EEPROM non-volatile memory, so changed parameter
values will be retained at power-down.
[0]
*
Off Deactivates the non-volatile storage function.
[1] Store edit setup Stores all parameter values in the set-up selected in par. 9-70 in the non-volatile memory. The selection returns
to Off [0] when all values have been stored.
[2] Store all set-ups Stores all parameter values for all set-ups in the non-volatile memory. The selection returns to
Off [0] when all
parameter values have been stored.
9-72 Drive Reset
Option: Function:
[0] *
No action
[1] Power-on reset Resets frequency converter upon power-up, as for power-cycle.
[3] Comm. option reset Resets the Profibus option only, useful after changing certain settings in parameter group 9-**, e.g. par. 9-18.
When reset, the frequency converter disappears from the fieldbus, which may cause a communication error
from the master.
9-80 Defined Parameters (1)
Array [116]
No LCP access
Read only
0 * [0 - 115]
This parameter displays a list of all the defined frequency converter parameters available for Profibus.
9-81 Defined Parameters (2)
Array [116]
No LCP access
Read only
0 * [0 - 115]
This parameter displays a list of all the defined frequency converter parameters available for Profibus.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
104 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English