10-32 Devicenet Revision
Range: Function:
0
*
[0 - 65535]
View the DeviceNet revision number. This parameter is used for EDS file creation.
10-33 Store Always
Option: Function:
[0]
*
Off Deactivates non-volatile storage of data.
[1] On Stores parameter data received via DeviceNet in EEPROM non-volatile memory as default.
10-39 Devicenet F Parameters
Array [1000]
No LCP access
0
*
[0 - 0]
This parameter is used to configure the frequency converter via DeviceNet and build the EDS-file.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
112
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
