Danfoss VLT FC 100 Series

18-34 Analog Output X42/9
Range: Function:
00.0 * [0 – 30.000]
Read out of the value of the signal applied to terminal X42/9 on the Analog I/O Card.
The value shown reflects the selection in par. 26-50.
18-35 Analog Output X42/11
Range: Function:
00.0 * [0 – 30.000]
Read out of the value of the signal applied to terminal X42/11 on the Analog I/O Card.
The value shown reflects the selection in par. 26-60.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
152 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3