23-10 Maintenance Item
Option: Function:
Select the item to be associated with the Preventive Maintenance Event.
[1]
*
Motor bearings
[2] Fan bearings
[3] Pump bearings
[4] Valve
[5] Pressure transmitter
[6] Flow transmitter
[7] Temperature transmit-
ter
[8] Pump seals
[9] Fan belt
[10] Filter
[11] Drive cooling fan
[12] Drive system health
check
[13] Warranty
[20] Maintenance Text 0
[21] Maintenance Text 1
[22] Maintenance Text 2
[23] Maintenance Text 3
[24] Maintenance Text 4
[25] Maintenance Text 5
NB!
The Preventive Maintenance Events are defined in a 20 element array. Hence each Preventive Maintenance Event must use the same
array element index in
par. 23-10 – 23-14
.
23-11 Maintenance Action
Option: Function:
Select the action to be associated with the Preventive Maintenance Event.
[1]
*
Lubricate
[2] Clean
[3] Replace
[4] Inspect/Check
[5] Overhaul
[6] Renew
[7] Check
[20] Maintenance Text 0
[21] Maintenance Text 1
[22] Maintenance Text 2
[23] Maintenance Text 3
[24] Maintenance Text 4
[25] Maintenance Text 5
3. Parameter Description VLT
®
HVAC Drive Programming Guide
192
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
