Danfoss VLT FC 100 Series Programming Guide

0-01 Language
Option: Function:
Defines the language to be used in the display.
The frequency converter can be delivered with 4 different language packages. English and German are included
in all packages. English cannot be erased or manipulated.
[0]
*
English Part of Language packages 1 - 4
[1] German Part of Language packages 1 - 4
[2] French Part of Language package 1
[3] Danish Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italian Part of Language package 1
[6] Swedish Part of Language package 1
[7] Dutch Part of Language package 1
[10] Chinese Language package 2
[20] Finnish Part of Language package 1
[22] English US Part of Language package 4
[27] Greek Part of Language package 4
[28] Portuguese Part of Language package 4
[36] Slovenian Part of Language package 3
[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 4
[42] Traditional Chinese Part of Language package 2
[43] Bulgarian Part of Language package 3
[44] Serbian Part of Language package 3
[45] Romanian Part of Language package 3
[46] Hungarian Part of Language package 3
[47] Czech Part of Language package 3
[48] Polish Part of Language package 4
[49] Russian Part of Language package 3
[50] Thai Part of Language package 2
[51] Bahasa Indonesian Part of Language package 2
0-02 Motor Speed Unit
Option: Function:
This parameter cannot be adjusted while the motor is running.
The display showing depends on settings in parameter 0-02 and 0-03. The default setting of parameters 0-02
and 0-03 depends on which region of the world the frequency converter is supplied to, but can be re-program-
med as required.
NB!
Changing the
Motor Speed Unit will reset certain parameters to their initial value. It is rec-
ommended to select the motor speed unit first, before modifying other parameters.
[0] RPM Selects display of motor speed variables and parameters (i.e. references, feedbacks and limits) in terms of motor
speed (RPM).
[1]
*
Hz Selects display of motor speed variables and parameters (i.e. references, feedbacks and limits) in terms of output
frequency to the motor (Hz).
3. Parameter Description VLT
®
HVAC Drive Programming Guide
24 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English