Danfoss VLT FC 100 Series - Page 255

Par. No. # Parameter description Default value 4-set-up FC 302
only
Change during op-
eration
Conver-
sion index
Type
11-0* LonWorks ID 11-00 Neuron ID 0 N/A All set-ups TRUE 0 OctStr[6] 11-1* LON Functions 11-10 Drive Profile [0] VSD profile All set-ups TRUE - Uint8 11-15 LON Warning Word 0 N/A All set-ups TRUE 0 Uint16
11-17 XIF Revision 0 N/A All set-ups TRUE 0 VisStr[5]
11-18 LonWorks Revision 0 N/A All set-ups TRUE 0 VisStr[5] 11-2* LON Param. Access 11-21 Store Data Values [0] Off All set-ups TRUE - Uint8
5.1.12. 11-** LonWorks
VLT
®
HVAC Drive Programming Guide 5. Parameter Lists
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark 255
5