Running Hours, 15-01 133
S
Samples Before Trigger, 15-14 136
Sbw Destaging Delay, 25-24 212
Sbw Staging Delay, 25-23 212
Semi-auto By-pass Feature, 4-64 64
Service Code, 14-29 129
Set Date And Time, 0-70 36
Setpoint 1, 20-21 159
Setpoint 2, 20-22 159
Setpoint 3, 20-23 159
Set-up Copy, 0-51 35
Short Cycle Protection 182
Short Cycle Protection, 22-75 182
Sl Controller Mode, 13-00 115
Sl Controller State, 16-38 143
Slave Error Count, 8-83 97
Slave Message Count, 8-82 97
Sleep Mode 178
Slip Compensation 1-62 44
Software Version 3
Special Functions 124
Speed At Design Point [hz], 22-86 186
Speed At Design Point [rpm], 22-85 186
Speed At No-flow [hz], 22-84 186
Speed At No-flow [rpm], 22-83 186
Square-linear Curve Approximation, 22-81 184
Stage Function, 25-27 213
Staging Bandwidth, 25-20 211
Staging Mode At Alternation, 25-56 218
Staging Speed, 25-44 216
Staging Threshold, 25-42 215
Start Delay, 1-71 44
Start Event, 13-01 115
Start Select, 8-53 94
Stator Leakage Reactance 41
Stator Resistance Rs, 1-30 42
Status 8
Status Messages 5, 231
Step Size 58
Step-by-step 21
Store Always 10-33 112
Store Data Values 10-31 111
Store Data Values, 11-21 114
Sw Id Control Card, 15-49 139
Sw Id Power Card, 15-50 139
Sw Version, 15-43 138
Switching Frequency, 14-01 124
Switching Pattern, 14-00 124
T
Telegram Selection, 8-40 93
Term. 29 High Ref./feedb. Value, 5-53 76
Term. 29 Low Frequency 75
Term. 29 Low Ref./feedb. Value, 5-52 76
Term. 33 Low Frequency, 5-55 76
Term. X30/12 Low Ref./feedb. Value, 6-44 84
Terminal 19 Digital Input, 5-11 68
Terminal 27 Digital Input, 5-12 68
Terminal 27 Pulse Output Variable, 5-60 77
Terminal 29 Digital Input, 5-13 68
Terminal 29 Mode, 5-02 65
Terminal 29 Pulse Output Variable, 5-63 77
Terminal 32 Digital Input, 5-14 69
Terminal 33 Digital Input, 5-15 69
Terminal 33 High Frequency, 5-56 76
Index VLT
®
HVAC Drive Programming Guide
282
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
To Next Page
Loading...
