3-95 Ramp Delay
Range: Function:
1 s
*
[0 to 3600 s]
Enter the delay required from activation of the digital potentiometer function until the frequency converter starts
to ramp the reference. With a delay of 0 ms, the reference starts to ramp as soon as INCREASE / DECREASE is
activated. See also par. 3-91
Ramp Time
.
VLT
®
HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
59
3
To Next Page
Loading...
