Danfoss VLT FC 100 Series Programming Guide

[1] *
Standard telegram 1
[101] PPO 1
[102] PPO 2
[103] PPO 3
[104] PPO 4
[105] PPO 5
[106] PPO 6
[107] PPO 7
[108] PPO 8
[200] Custom telegram 1
3.9.6. 8-5* Digital/Bus
Parameters for configuring the control word Digital/Bus merging.
8-50 Coasting Select
Option: Function:
Select control of the coasting function via the terminals (digital input) and/or via the bus.
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR
NB!
This parameter is active only when
par. 8-01 Control Site is set to [0] Digital and control word .
8-52 DC Brake Select
Option: Function:
Select control of the DC brake via the terminals (digital input) and/or via the fieldbus.
[0] Digital input
[1] Bus
[2] Logic AND
[3]
*
Logic OR
NB!
This parameter is active only when par. 8-01
Control Site is set to [0] Digital and control word .
8-53 Start Select
Option: Function:
Select control of the frequency converter start function via the terminals (digital input) and/or via the fieldbus.
[0] Digital input
[1] Bus Activates Start command via the serial communication port or fieldbus option.
[2] Logic AND Activates Start command via the fieldbus/serial communication port, AND additionally via one of the digital
inputs.
3. Parameter Description VLT
®
HVAC Drive Programming Guide
94 MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English