Danfoss VLT Flow Drive FC 111 User Manual

Table 210: Range:
Min: 0
Max: 4294967295
Default value: 0
8-82 Slave Messages Rcvd
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int32
Change during operation: True
This parameter shows the number of valid telegrams addressed to the slave, sent by the drive.
Table 211: Range:
Min: 0
Max: 4294967295
Default value: 0
8-83 Slave Error Count
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int32
Change during operation: True
This parameter shows the number of error telegrams, which the drive could not execute.
Table 212: Range:
Min: 0
Max: 4294967295
Default value: 0
8-84 Slave Messages Sent
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int32
Change during operation: True
This parameter shows the number of messages sent from the slave.
Table 213: Range:
Min: 0
Max: 4294967295
Default value: 0
8-85 Slave Timeout Errors
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int32
Change during operation: True
This parameter shows the number of slave timeout errors.
Table 214: Range:
Min: 0
Max: 4294967295
Default value: 0
8-88 Reset FC port Diagnostics
Default value: [0] Do not reset
Parameter type: Option
2-setup: 1 setup
Conversion index: -
Data type: u_int8
Change during operation: True
Table 215: Option:
[0]
Do not reset
[1]
Reset counter
AU363928304090en-000101 / 130R0982114 | Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English