Danfoss VLT Flow Drive FC 111 User Manual

The minimum reference is the lowest value obtainable by summing all references.
Table 97: Range:
Min: -4999
Max: 4999
Default value: 0
3-03 Maximum Reference
Default value: Configuration dependent
Parameter type: Range
2-setup: All setups
Conversion index: -3
Data type: int32
Change during operation: True
The maximum reference is the highest value obtainable by summing all references. The maximum reference unit matches the selec-
tion of configuration in parameter 1-00 Configuration Mode.
Table 98: Range:
Min: -4999.0
Max: 4999
Default value: Configuration dependent
4.5.2 3-1* References
P3-03
P3-02
0
50
100%
P3-10
e30bb036.11
Illustration 9: References
3-10 Preset Reference
Default value: 0%
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: int16 [8]
Change during operation: True
Enter up to 8 different preset references (0–7) in this parameter, using array programming. For selecting dedicated references, select
preset reference bit 0/1/2 [16], [17], or [18] for the corresponding digital inputs in parameter group 5-1* Digital Inputs.
Table 99: Range:
Min: -100%
Max: +100%
Default value: 0%
3-11 Jog Speed [Hz]
Default value: 5 Hz
Parameter type: Range
2-setup: All setups
Conversion index: -1
Data type: u_int16
Change during operation: True
AU363928304090en-000101 / 130R098260 | Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English