User guide Installation
7
Installation
Unpacking the printer
Place your printer on a solid surface (see Placing
your printer, page 8).
Make sure that the “Up” symbols point in the correct
direction.
Open the packaging, take out the accessory cassette
and unpack it. Pull the printer out of the cardboard
box towards you and remove the remaining
packaging material.
Check the printer for any visible transport damage
and completeness. Apart from this CD-ROM (c) the
Quick start guide (d), the power cable (e) and the
ribbon (
f) must be included.
If you find any transport damage or if any accessories
are missing, please contact your dealer.
2
f
e
d
c
To Next Page
Loading...
