User guide Options and accessories
175
Options and accessories
Options The following options can be ordered for your printer.
Tractor 2, front The push tractor is suitable for fanfold paper. You can use paper for-
mats with a width in the range from 76 to 406 mm; you can set any
intermediate format.
Part no.: 061052
Autocut facility An additional module for automatic cutting (cannot be used in con-
junction with the automatic cut sheet feeder [ASF-R]).
Part no.: 062661
Printer pedestal A cabinet to be used as a printer stand and for storing fanfold paper
stacks.
Part no.: 062690
ESD brush ESD brush to be installed on top friction (contact your service
technician).
Part no.: 061191
Cable cover For the 2T model only.
Part no.: 061909
E
To Next Page
Loading...
