11
WARNING AND ALARMS DISPLAYED
HIGH TEMPERATURE WARNING – (Current temperature)º F/C HIGH HUMIDITY WARNING – (Current RH)%
LOW TEMPERATURE WARNING – (Current temperature)º F/C LOW HUMIDITY WARNING – (Current RH)%
LOW PRESSURE COMPRESSOR: 1 – (Automatic reset) NO AIRFLOW – CHECK BELT AND MOTOR
UNDER FLOOR WATER DETECTION – CHECK PROBE DIRTY FILTER – CHECK FILTERS
LOW PRESSURE COMPRESSOR: 2 – (Automatic reset) POWER FAILURE RESTART
MANUAL OVERRIDE – CHECK BYPASS SWITCHES FIRESTAT TRIPPED – Unit shutdown
HUMIDIFIER PROBLEM – CHECK WATER PRESSURE LOW VOLTAGE WARNING – CHECK VOLTAGE
TEMPERATURE SENSOR ERROR – SENSOR PROBLEM COMPRESSOR SHORT CYCLE – WARNING
MAINTENANCE REQUIRED LOCAL ALARM – SEE TAG INSIDE
HUMIDITY SENSOR FAILURE – SENSOR PROBLEM NO WATER FLOW* - CHECK WATER PUMP
CUSTOM MESSAGE – (Factory programmed custom message) SMOKE DETECTOR* - Unit shutdown
DISCHARGE AIR SENSOR ERROR* HIGH CONDENSATE WATER LEVEL*
FAN MOTOR OVERLOAD* – CHECK MOTOR AMPERAGE
STANDBY PUMP ON* - CHECK PRIMARY WATER PUMP
PERSON TO CONTACT ON ALARM* - (Programmable message)
HIGH PRESSURE/INTERNAL OVERLOAD COMPRESSOR: 1 - Manual reset required
HIGH PRESSURE/INTERNAL OVERLOAD COMPRESSOR: 2 - Manual reset required
HISTORICAL DATA DISPLAYED
EQUIPMENT RUNTIMES – Blower, compressor 1 and 2, reheat strip 1, 2, and 3, dehumidifi cation, Energy Saver*,
humidifi er, condenser and chilled water
ALARM HISTORY – Last 10 alarms with time and date of occurrence
LAST 24 HOURS – High and low temperature, high and low humidity
AVERAGE PERCENT OF CAPACITY LAST HOUR – Compressor(s), humidifi er, reheat strips and water valve
* This optional feature or data display may require additional components and/or sensors.
To Next Page
Loading...
Need help?
General
