12
PROGRAMMABLE SELECTIONS
Temperature setpoint Temperature deadband
High temperature alarm limit Low temperature alarm limit
Humidity setpoint Humidity deadband
High humidity alarm limit Low humidity alarm limit
Mode and stage response time Compressor lead/lag sequence
Reset equipment runtimes Audio alarm mode
Automatic self-test acknowledgement Manual diagnosis
Humidity anticipation Compressor short cycle alarm
Dehumidifi cation mode Low discharge temperature alarm limit*
Power problem or restart mode System start delay
Message for optional alarm 1, 2, 3, and 4* Delay for optional alarm 1, 2, 3, and 4
Compressor supplements to energy saver* Remote alarm 1, 2, 3 and 4 selection*
Person to contact on alarm Defi ne password
Humidifi er autofl ush timer* Firestat temperature alarm limit
Scheduled normal maintenance Temperature scale
Calibrate temperature sensor Calibrate humidity sensor
Compressor(s) Reheat states
Humidifi er Water valve mode
Water valve voltage range Reverse acting water valve
Network protocol* Analog module sensor setups*
Fan speed control module*
Calibrate discharge air sensor or chilled water temperature sensor*
*
- May require optional modules
To Next Page
Loading...
