Data Aire DAP III - Page 56

56
SELECT  or  - To change setting. Time can be set from 00:00 hours to 23:45 hours in 15
minute increments. N/C (no change) is also an option.
MENU  - To view next sub-menu
Display will read: 8-11 THURSDAY SCHEDULE
SELECT  - To view current setting
Display will read: 8-11 THURSDAY SCHEDULE
SCHEDULE TYPE: aaaa/aaa
SELECT  or  - To change setting. There are two settings: ON/OFF and SETBACK/UP
MENU  - To view next menu
Display will read: 8-11 THURSDAY SCHEDULE
OCCUPIED hh:mm
SELECT  or  - To change setting. Time can be set from 00:00 hours to 23:45 hours in 15
minute increments. N/C (no change) is also an option.
MENU  - To view next menu
Display will read: 8-11 THURSDAY SCHEDULE
UNOCCUPIED hh:mm
SELECT  or  - To change setting. Time can be set from 00:00 hours to 23:45 hours in 15
second increments. N/C (no change) is also an option.
MENU  - To view next sub-menu
Display will read: 8-12 FRIDAY SCHEDULE
SELECT  - To view current setting
Display will read: 8-12 FRIDAY SCHEDULE
SCHEDULE TYPE: aaaaa/aaaa
SELECT  or  - To change setting. There are two settings: ON/OFF and SETBACK/UP
MENU  - To view next menu
Display will read: 8-12 FRIDAY SCHEDULE
OCCUPIED hh:mm
SELECT  or  - To change setting. Time can be set from 00:00 hours to 23:45 hours in 15
minute increments. N/C (no change) is also an option.
MENU  - To view next menu
Display will read: 8-12 FRIDAY SCHEDULE
UNOCCUPIED hh:mm
SELECT  or  - To change setting. Time can be set from 00:00 hours to 23:45 hours in 15 minute
increments. N/C (no change) is also an option.