DataCard CD800 Installation And Administrator's Guide

98 Supplies and Parts
Replacement Parts
The following replacement parts are available.
Printhead Cartridge
The printer has a replaceable printhead cartridge. The printhead is
subject to wear or damage and has a direct impact on print quality.
Do not touch the printing edge of the printhead in the printhead
cartridge. Clean the printhead following the steps in your printer’s
User’s Guide.
Print Ribbon Cartridge
The ribbon cartridge holds the print ribbon and the replaceable
cleaning sleeve in the printer.
Cleaning Roller Spindle
The cleaning roller spindle holds the replaceable cleaning sleeve.
Laminator Cartridges
The L1 (green) and L2 (orange) cartridges hold the
laminator overlay material. They are used in the SD460
system only.
Impresser Die
Contact Entrust Datacard to special order a new die for your impresser. The
die must be installed by an authorized Entrust Datacard service provider.
The die is available for the SD460 system only.

DataCard CD800 Specifications

General

Print Resolution	300 dpi
Weight	12 lbs (5.4 kg)
Power Requirements	100-240 VAC, 50/60 Hz
Print Technology	Dye-sublimation
Card Capacity	100 cards (standard hopper)
Connectivity	USB
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Compatibility	Windows
Card Thickness	0.020" - 0.040" (0.51 mm - 1.02 mm)