DataCard CD800 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 35
Single-Wire Smart Card
Single-wire smart card processing allows a single USB or Ethernet connection with the printer to
carry data for both smart card personalization and printing.
The single-wire smart card feature is available to an application through the Windows Driver
Software Development Kit (SDK), or through your card personalization software.
Required components for single-wire smart card are the same as for other smart card systems
except as noted.
Settings for Card Design in Printer Manager
Printer Manager contains card design settings that managers and service providers can use to set
up card production. The card design settings include magnetic stripe setup and smart card
testing. Printer Manager also contains troubleshooting features such as a log file that can track all
processes of a card job. Service providers can use the information in the log file to troubleshoot
and relay information when troubleshooting card processing issues. Refer to Chapter 3: "Printer
Manager” for more information.
The single-wire smart card programming interface is similar, but not identical, to
the PC/SC standard. Applications using PC/SC to personalize smart cards require
modification to use the single-wire smart card interface.

DataCard CD800 Specifications

General

Print Resolution	300 dpi
Weight	12 lbs (5.4 kg)
Power Requirements	100-240 VAC, 50/60 Hz
Print Technology	Dye-sublimation
Card Capacity	100 cards (standard hopper)
Connectivity	USB
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Compatibility	Windows
Card Thickness	0.020" - 0.040" (0.51 mm - 1.02 mm)