DataCard CD800 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 101
 Laminator–the laminator power supplies are rated as follows:
 Laminator with L1 only:
 Input: 100–240V, 47–63Hz, 2.2A
 Output: 24V, 3.75A, 90W
 Laminator with L1 and L2:
 Input: 100–240V, 47–63Hz, 2.2A
 Output: 24V, 6.6A, 160W
Laminator power supplies are self-adjusting within the rated input voltage
Power Cords
You can order power cords for the following:
 Printer—The printer power cord connects the printer power supply to the facility power. Be
sure to use a cord that grounds to the facility power source.
 Laminator—The laminator power cord connects the laminator power supply to the facility
power.
The printer and laminator can use one of the following country-specific power cords:
 USA power cord
 Australia power cord
 Brazil power cord
 China power cord
 Denmark power cord
 European power cord
 India power cord
 Israel power cord
 Italy power cord
 Japan power cord
 South Africa power cord
 Swiss power cord
 United Kingdom power cord

DataCard CD800 Specifications

General

Print Resolution	300 dpi
Weight	12 lbs (5.4 kg)
Power Requirements	100-240 VAC, 50/60 Hz
Print Technology	Dye-sublimation
Card Capacity	100 cards (standard hopper)
Connectivity	USB
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Compatibility	Windows
Card Thickness	0.020" - 0.040" (0.51 mm - 1.02 mm)