DataCard CD800 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 71
 Hopper1DebowDwellMs—Set the time, in milliseconds, the debow action is applied to a
card. The default is 2000 ms (2 seconds).
 Increase the value to apply the debow action longer.
 Decrease the value to apply the debow action for less time.
Hopper 1 Impresser Settings:
 Hopper1ImpressDepth—Set the depth of the impression on a card. The value is in steps of
the impresser punch.
 Increase the value to deepen the impression.
 Decrease the value to lessen the impression.
 Hopper1ImpressDwellTime—Set the time, in milliseconds, that the impresser remains in
contact with the card. The default is 2000 ms (2 seconds).
 Increase the value to allow the impresser to remain on the card longer.
 Decrease the value to impress the card for a shorter time.
 Hopper1ImpressPositionOffset1—Set the distance from the trailing edge of the card to the
center of the first impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 Hopper1ImpressPositionOffset2—Set the distance from the trailing edge of the card to the
center of the second impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 Hopper1ImpressPositionOffset3—Set the distance from the trailing edge of the card to the
center of the third impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
You may need to adjust the card impress depth value based on the card
material and overlay type used.

DataCard CD800 Specifications

General

Print Resolution	300 dpi
Weight	12 lbs (5.4 kg)
Power Requirements	100-240 VAC, 50/60 Hz
Print Technology	Dye-sublimation
Card Capacity	100 cards (standard hopper)
Connectivity	USB
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Compatibility	Windows
Card Thickness	0.020" - 0.040" (0.51 mm - 1.02 mm)