DataCard CD820

CD820 Instant Issuance System User’s Guide 31
2. Use the LCD menu system to start the cleaning cycle.
a. Begin when the printer displays Ready and the U
SER
button shows steady green. Press the U
SER button.
Suspended displays on line 1 of the LCD panel.
b. Press E
NTER to enter the menu system.
c. Maintenance displays on line 2 of the LCD panel. Press
E
NTER to enter the Maintenance menu.
d. Cleaning Card displays on line 2 of the LCD panel. Press
E
NTER to enter the Cleaning Card menu.
e. Start displays on line 2 of the LCD panel. Press E
NTER to
start the cleaning process.
f. Insert cleaning card displays on the LCD panel. Press the
U
SER button to start the cleaning cycle.
The printer moves the card through the printer several
times and places it in the reject card tray when the
cleaning cycle finishes.
3. Remove the used cleaning card. Wait a few minutes for the rollers to dry.