DataCard CE840 Installation And Administrator's Guide

CE870 Instant Issuance System Installation and Administrator’s Guide 25
When the system is deactivated, Print job queue is deactivated displays on the LCD panel.
1. Enter the menu system.
a. Press the U
SER button and then press ENTER.
b. Main Menu displays on line 1 of the LCD panel.
2. Enter the Activate menu.
a. Press the down arrow key until Activate displays on line 2
of the LCD panel.
b. Press E
NTER to enter the Activate menu.
Activate displays on line 1 and Enable displays on line 2 of
the LCD screen.
c. Press E
NTER to enter the Enable menu.
3. Enter the activation code.
a. Press the up and down arrows to cycle through the alpha
and numeric characters. Press E
NTER to select each
character that matches the 8-digit numeric activation
code.
b. When the 8-digit activation code displays completely,
press E
NTER again with a blank character entry to submit the code.
The code you entered displays on the LCD panel so you
can confirm that it was entered correctly. Apply displays
on line 2.
If the code is not correct, press the U
SER button to exit and
return to the blank Activate screen. Reenter the code.
c. When the code is correct, press E
NTER to apply the code.
When the system activation is successful, Request Success
displays briefly on line 2 of the LCD panel and the U
SER
light glows steady green. The LCD panel then displays
Ready to show that the printer is available.
If another message displays on line 2 of the LCD screen,
system activation failed. Repeat step 3. If activation fails
again, contact Datacard Technical Phone Support at
1-800-328-3996.
1
2

DataCard CE840 Specifications

General

Brand	DataCard
Model	CE840
Category	Printer
Language	English