DataCard CR500 User Manual

Datacard CR500 User Reference Guide Clean the System
23
22
4. Clean the rollers.
a. Rinse the blue cleaning rollers with cold water. Gently rub the rollers
under running water.
Cauon: Do not use soap or detergents, which can damage the rollers.
b. Allow the card cleaning rollers to dry thoroughly.
c. If debris remains on the rollers, use the dual-sided cleaning card.
i. Remove the protecve paper from both sides of the cleaning card
(part no. 508976-001).
ii. Insert the cleaning card into the rollers of the cleaning unit.
iii. Move the cleaning card back and forth through the rollers unl all
debris possible is removed.
If you have trouble moving the cleaning card through the rollers, remove a
jog dial from the printer and use it to turn the rollers with the card in place.
d. If any debris sll remains, use a cleaning swab to clean the rollers unl
no debris is visible.
i. When nished using the cleaning swab to clean the rollers, rinse
the rollers under running water again to remove any traces of
isopropanol le by the swab.
ii. Allow the rollers to dry completely before reinstalling the cleaning
unit.
5. Reinstall the cleaning unit with the blue rollers facing to the right.
6. Replace the jog dial if it was removed.
7. If cleaning is complete, close the print unit door and the security enclosure
door to lock the printer.
or
Connue with “Clean the Mul-Hopper.”
4a
4b
Jog Dial

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English