DataCard CR500 User Manual

Datacard CR500 User Reference Guide Load Supplies
11
10
Load the Retransfer Film
When the retransfer lm runs out, “Media Run Out” displays on the print unit front
panel, and message 162, “Retransfer lm out,” displays on the touch screen. The
le column of the touch screen supplies gauge shows white, not green.
Do the following to load the retransfer lm cartridge.
1. Unlock the printer and open the security enclosure.
2. On the print unit, slide the door latch up and open the print unit door.
3. Press the retransfer lm cartridge eject buon and remove the green
cartridge.
6. Insert the loaded ribbon cartridge in the printer unl it clicks into posion.
7. Close the print unit door.
8. On the print unit front panel, press Reset and then Return to inialize the ink
ribbon.
9. Close the security enclosure door to lock the printer.
1
2
3

DataCard CR500 Specifications

General

Brand	DataCard
Model	CR500
Category	Printer
Language	English