DataCard SD460 User Manual

XPS Card Printer Driver User’s Guide 27
Use Printer Manager to Set Up Secure Printing
Do the following to set up secure printing:
1. Install a printer that supports secure printing. Refer to the printer’s Installation and
Administrator’s Guide for a list of hardware and software requirements.
2. Install and set up the Card Printer Driver. Refer to “Install the Driver” on page 9.
3. Use the Printer Manager web interface to enable secure printing.
a. Sign on as a WebAdmin and select Printer Setting > Behavior.
b. Set DPCL2 to Disabled, and make sure that DPCL2Secure is set to Enabled.
Refer to the printer’s Installation and Administrator’s Guide for complete information
about using Printer Manager.
c. Click Set Current to save your changes.
4. Restart the printer and computer for the settings to take effect.
5. Connect your secure printers to the host and client PCs.
After secure printing is set up, the Card Printer Driver automatically detects and uses secure
printing during card production.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm