EasyManua.ls Logo

Datacom DM984-100B User Manual

Datacom DM984-100B
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ADMINISTRATION-MANUAL
GPON - ONU
DM984-100B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Datacom DM984-100B and is the answer not in the manual?

Datacom DM984-100B Specifications

General IconGeneral
Wi-Fi StandardsIEEE 802.11b/g/n
Frequency Band2.4 GHz
Wireless SpeedUp to 300 Mbps
Antenna2 x 5dBi external antennas
Humidity10% to 90% non-condensing
SecurityWPA/WPA2
Operating ModesRepeater
Operating Temperature0°C to 40°C

Summary

DM984-100B at a Glance

Introduction to GPON

Physical Setup

IP Multiservice Access Platform (IPSAN)

Details using the IPSAN as an OLT for GPON connections.

First Steps with IPSAN

Initial Connection

Details the initial connection methods to the IPSAN CLI.

Working with the CLI

Explains how to navigate and use the IPSAN Command Line Interface.

Setup of Management Access via SSH

Explains how to configure SSH access for secure management.

IPSAN Configuration

ONU Registration

Describes the process of registering an ONU with the IPSAN.

ONU Status Checking

Explains how to check the operational status of an ONU.

ONU Firmware Upgrade

Outlines the procedure for upgrading the ONU's firmware via IPSAN.

Profile Management

Manages various profiles affecting ONU integration in the GPON system.

SLA-Profile Configuration

Manages bandwidth of a T-CONT with different traffic types.

TCONT-VP-BIND-Profile

Creates T-CONTs and assigns bandwidth/GEM port mappings.

FLOW-Profile

Differentiates packets by VLAN IDs/priorities and redirects them to GEM ports.

VLAN Translation Rules

Configures VLAN translation rules for single-tagged packets.

VLAN Rules for Double Tagging Operations

Configures VLAN translation rules for double-tagged packets.

Configuring the IP Whitelist

Sets up IP address whitelists for virtual ports to prevent unauthorized traffic.

Configuring the Uplink Interface

Configures the Ethernet interface used for connecting to the service provider network.

Configuration Guides - IPSAN

Simple Connection with Single Tagged VLAN Setup

Guide for configuring a basic connection with a single tagged VLAN.

Full Example Configurations

Supported Managed Entities