Datacom DM984-100B - Setup of Management Access via Telnet

DM984 product family CHAPTER 10. FIRST STEPS WITH IPSAN
Name Format Description
<flash-position> Number (1-10) Position where the configuration is stored
Example:
DM4650#copy running-config flash-config 10
Saving running configuration in flash 10...
DM4650#
10.4 Marking Configurations for Startup
To mark a configuration for loading upon the next startup the following command
must be:
select startup-config <flash-position>
Description of the used parameters:
Name Format Description
<flash-position> Number (1-10) Position where the configuration is stored
Example:
DM4650#select startup-config 10
DM4650#
10.5 Rebooting the Equipment
To reboot the IPSAN the following command is issued:
reboot
Example:
DM4650#reboot
Please save startup configuration.
Are you sure you want to reboot the system? <y/N> y
Connection closed by foreign host.
10.6 Setup of Management Access via Telnet
The IPSAN has a dedicated management Ethernet interface, which is used for
configuration purposes.
DATACOM
204.4288.00