DM984 product family CHAPTER 11. IPSAN CONFIGURATION
11. IPSAN Configuration
11.1 ONU Registration
The following steps are done in the configuration menu. In order to register
the ONU it is needed to specify the desired authentication method. First it is
necessary to switch to the menu of the GPON unit-card, by typing
unit-gpon <unit>
Description of the used parameters:
Name Format Description
<unit> Number (1-7) Card slot of the plugged in GPON card
In the following example it is assumed that the GPON card is plugged into slot 7.
Example:
DM4650(config)#unit-gpon 7
DM4650(unit-gpon-7)#
The following command is provided to configure the registration method:
authentication-method <method>
In place of the parameter <method> there are 3 different options that can be
picked:
• serial-number
• serial-number-and-password
• password
Now it is necessary to pick one of the options by writing the keyword after the
command and pressing ENTER.
Example with serial number method:
DATACOM
204.4288.00
To Next Page
Loading...