DM984 product family CHAPTER 12. CONFIGURATION GUIDES
12.4 IGMP Setup
This guide features all steps needed for proper use of IGMP
1. Create a FLOW-Profile with a unique VLAN ID (see FLOW-Profile for
more information)
2. Register the ONU (see ONU-Registration for more information)
• Use any registration method
3. Assign the created FLOW-Profile (see Assigning a FLOW-Profile for more
information)
4. (Optional) Assign the unique VLAN ID of the FLOW-Profile as native
VLAN (see Assigning Native VLANs for more information)
5. Change the IP white-list of the virtual-port to ’all’ or setup the white-list
accordingly (see Configuring the IP white-list for more information)
6. Configure an uplink interface for GPON operation (see Configuring the
Uplink interface for more information)
7. Configure the VLAN interface with the same VLAN ID as in the FLOW-
Profile for GPON operation (see Configuring the VLAN Interface for more
information)
8. Configure IGMP (see IGMP-controlled Multicast for more information)
• Disable the IGMP proxy
• Create at least 1 IGMP channel
• Create at least 1 IGMP profile and assign the channels as needed
• Enable IGMP snooping for any predefined VLAN of the FLOW-Profile
and for the used uplink port
DATACOM
204.4288.00
To Next Page
Loading...