Datacom DM984-100B - Configuration of an IP Address; Configuration of a Default Gateway

To Next Page

To Previous Page

DM984 product family CHAPTER 11. IPSAN CONFIGURATION

allowed-ip address <ipaddress> vlan <vid>

Rule creation example with IP address and single-tagged VLAN:

DM4650(config-if-gpon-vp-7/1/1/1)#allowed-ip address 10.20.30.10

,→ vlan 100

DM4650(config-if-gpon-vp-7/1/1/1)#

Rule creation example with IP address range netmask in bit and single-tagged

VLAN:

DM4650(config-if-gpon-vp-7/1/1/1)#allowed-ip address range

,→ 10.20.30.100 mask 24 vlan 100

DM4650(config-if-gpon-vp-7/1/1/1)#

Rule creation example with keyword ’all’:

DM4650(config-if-gpon-vp-7/1/1/1)#allowed-ip address all

DM4650(config-if-gpon-vp-7/1/1/1)#

11.8.4 Conﬁguration of an IP Address

The IP address is used for all IP related services that directly impact the ONU.

For the conﬁguration of a IP address the following command must be issued:

ip-address <ip-address>/<netmask>

Description of the used parameters:

Name Format Description

<ip-address> IPv4 address IP address of the ONU

<netmask> Number network’s subnet mask in bit

DM4650(config-if-gpon-7/3/2)#ip-address 10.20.30.1/24

DM4650(config-if-gpon-7/3/2)#

11.8.5 Conﬁguration of a Default Gateway

The default gateway is used for all IP related services that directly impact the

ONU.

For the conﬁguration of a default gateway the following command must be issued:

DATACOM

204.4288.00