DM984 product family CHAPTER 10. FIRST STEPS WITH IPSAN
DM4650#passwd
Type Old Password
password:
Type New Password
password:
Confirm Password
password:
Password changed sucessfully.
DM4650#
For a guide on how to create more users besides the admin user please refer to
the IPSAN’s User Manual.[1]
10.2 Working with the CLI
To achieve any configuration on the IPSAN it is necessary to go into the so called
configuration menu by typing:
configure
Example:
DM4650#configure
DM4650(config)#
The builtin help can be accessed by pressing ’?’ or issuing the command help.
This is possible at any time when at the IPSAN’s prompt.
The IPSAN supports auto-completion. Based on the example above it is possible
to just type conf and confirm the command with ENTER or complete the com-
mand automatically by pressing TAB. This is possible with all commands when
at the IPSAN’s prompt.
Example:
DM4650#conf
DM4650(config)#
When a menu is active, more information about the menu is available by issuing
the following command:
show this
Note:In some menus it isn’t possible to do that, e.g. the configuration menu.
Example:
DATACOM
204.4288.00
To Next Page
Loading...