Datacom DM984-100B - ONU Status Checking

DM984 product family CHAPTER 11. IPSAN CONFIGURATION
onu <id> <cmd>
In place of <cmd> there are 3 possible command parts:
• serial-number <serial>
• serial-number <serial> password <password>
• password <password>
Name Format Description
<id> Number (1-128) ID of the ONU to be added
<serial> 4 Letters 8 Numbers Unique predefined serial number of the ONU
<password> Alphanumeric (10 char) Preconfigured password of the ONU
Note: When the chosen id is already taken it will change the existing entry.
Example for serial number registration method:
DM4650(config)#interface gpon 7/3
DM4650(config-if-gpon-7/3)#onu 1 serial-number DACM00000000
DM4650(config-if-gpon-7/3/1)#exit
DM4650(config-if-gpon-7/3)#exit
DM4650(config)#
Example for serial number and password registration method:
DM4650(config)#interface gpon 7/3
DM4650(config-if-gpon-7/3)#onu 1 serial-number DACM00000000
,→ password pass123
DM4650(config-if-gpon-7/3/1)#exit
DM4650(config-if-gpon-7/3)#exit
DM4650(config)#
Example for password registration method:
DM4650(config)#interface gpon 7/3
DM4650(config-if-gpon-7/3)#onu 1 password pass123
DM4650(config-if-gpon-7/3/1)#exit
DM4650(config-if-gpon-7/3)#exit
DM4650(config)#
Note:When the registration process is finished the prompt will automatically
switch to the ONU menu.
11.2 ONU status checking
The following command is used in the ONU menu in order to check the status
of the ONU:
DATACOM
204.4288.00