DM984 product family CHAPTER 11. IPSAN CONFIGURATION
Name Format Description
<name> Alphanumeric Name of the ONU-Profile
Note: When the chosen name is already taken it will change the existing entry.
For the number of Ethernet ports the following command must be issued
num-eth-uni <number>
Description of the used parameters:
Name Format Description
<number> Number (0-4) Number of hardware Ethernet ports of the ONU
For the number of POTS ports the following command must be issued
num-pots-uni <number>
Description of the used parameters:
Name Format Description
<number> Number (0-2) Number of hardware POTS ports of the ONU
For the maximum number of supported TCONTs the following command must
be issued
max-tcont <number>
Description of the used parameters:
Name Format Description
<number> Number (1-6) Number of T-CONTs
Example for ONU-Profile creation:
DM4650(config)#profile gpon onu 123
DM4650(config-prof-gpon-onu-123)#num-eth-uni 1
DM4650(config-prof-gpon-onu-123)#num-pots-uni 0
DM4650(config-prof-gpon-onu-123)#exit
DM4650(config)#
Assigning an ONU-Profile
. In the ONU menu the profile is now assigned by issuing the following command:
onu-profile <name>
Description of the used parameters:
DATACOM
204.4288.00
To Next Page
Loading...