Cleaning
Quick Reference Guide 9
Cleaning
Exterior surfaces and scan windows exposed to spills, smudges
or debris require periodic cleaning to ensure best performance
during scanning operations. Contacts on the scanner and the
base should also be cleaned as needed to ensure a good connec-
tion.
Use a soft, dry cloth to clean the product. If the product is very
soiled, clean it with a soft cloth moistened with a diluted non-
aggressive cleaning solution or diluted ethyl alcohol.
CAUTION
Do not use abrasive or aggressive cleansing agents or
abrasive pads to clean scan windows, contacts or plas-
tics.
Do not spray or pour liquids directly onto the unit.
To Next Page
Loading...
