Datalogic Matrix 210

MATRIX 210™ PARAMETERS LIST
49
4
%_ = Global Diagnostic Status
%C = ISO-IEC / AIM DPM Overall
(Grade)
%D = ISO-IEC / AIM DPM Overall
(Value)
%E = ISO-IEC Symbol Contrast / AIM
DPM Cell Contrast (grade)
%F = ISO-IEC Symbol Contrast / AIM
DPM Cell Contrast (value)
%G = ISO-IEC Print Growth (grade)
%H = ISO-IEC Print Growth (value)
%I = ISO-IEC / AIM DPM Axial Non-
Uniformity (grade)
%J = ISO-IEC / AIM DPM Axial Non-
Uniformity (value)
%K = ISO-IEC / AIM DPM Unused ECC
(grade)
%L = ISO-IEC / AIM DPM Unused ECC
(value)
%a = ISO-IEC / AIM DPM Decode
(grade)
%Q = ISO-IEC Modulation / AIM DPM
Cell Modulation (grade)
%R = ISO-IEC Modulation / AIM DPM
Cell Modulation (value)
%S = ISO-IEC Mean Edge Contrast
(grade)
%T = ISO-IEC Mean Edge Contrast
(value)
%U = ISO-IEC Decodability (grade)
%V = ISO-IEC Decodability (value)
%m = ISO-IEC / AIM DPM Fixed Pattern
Damage (grade)
%W = ISO-IEC / AIM DPM Fixed Pattern
Damage (value)
%n = ISO-IEC / AIM DPM Grid Non-
Uniformity (grade)
%X = ISO-IEC / AIM DPM Grid Non-
Uniformity (value)
%o = ISO-IEC / AIM DPM Minimum
Reflectance (grade)
%Y = ISO-IEC / AIM DPM Minimum
Reflectance (value)
%p = ISO-IEC Defects (grade)
%Z = ISO-IEC Defects (value)
%q = AS9132 Dot Size/Cell Fill (grade)
%u = AS9132 Dot Size/Cell Fill (value)
%r = AS9132 Dot Center Offset (grade)
%v = AS9132 Dot Center Offset (value)
%s = AS9132 Dot Ovality (Grade)
%w = AS9132 Dot Ovality (value)
%t = AS9132 Angle Of Distortion (grade)
%y = AS9132 Angle Of Distortion (value)
%z = AS9132 Quiet Zone (grade)
%0 = AS9132 Quiet Zone (value)
%b = AS9132 Symbol Contrast (grade)
%c = AS9132 Symbol Contrast (value)
Statistics Field
Separator String
2 ESC K H Length: 0 to 32