Datalogic QuickScan QD2131 Quick Reference Guide

Selecting the Interface Type
14 QuickScan™ QD2131
Caps Lock State
This option specifies the format in which the reader sends
character data. This is used by the keyboard wedge and USB
keyboard interfaces.
00 = CAPS LOCK Off, send character data in normal format.
01 = CAPS LOCK ON, send character data in reverse case.
02 = Auto CAPS LOCK. This applies to USB keyboard, and
Wedge E (AT) interfaces. For other interfaces this setting
defaults to CAPS LOCK Off functionality.
.
CAPS LOCK STATE
ENTER/EXIT PROGRAMMING MODE
Caps Lock State = Caps Lock OFF
Caps Lock State = Caps Lock ON
Caps Lock State = AUTO Caps Lock Enable

Datalogic QuickScan QD2131 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	-
Scanner type	1D
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional
2D (matrix & stacked) barcodes supported	Not supported
Product color	Black
International Protection (IP) code	IP41
Input voltage	4.75 - 14 V
Power consumption	140 mA
Power source type	Battery
Standard interfaces	USB
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	91 mm
Width	163 mm
Height	41 mm
Weight	150 g